The A-TEC A12 can be fitted to any shotgun with pump action or semiauto with choke system. It will be delivered with a choke that fits the gun of your choice.
Benelli– Super Black Eagle 2 & 3, M2, Vinci, Super Vinci, Ultra Light, Legacy Sport (made after 2007), current Sport II, Super Sport, Cordoba, Ethos, Montefeltro, Montefeltro Silver & 828U
A-TEC A12 is ONLY approved for wadded 12/70 ga. ammunition, max 42g. US #2 or smaller shot size. Do not use slugs, reloaded or high speed ammunition.
ATTACHMENT INSTRUCTIONS
Prior to use of the A12, the choke must be mounted correctly in the silencer.
Check that the two front screws and two backend screws are tight and that there are no foreign objects inside the silencer.
Check that you have the correct choke by trying it gently by hand in your barrel.
Screw the A12 choke all the way to the bottom of the threads in the A12 silencer.
Firmly tighten the lock nut with the supplied tools.
Screw the A12 silencer with choke attached on to your barrel.
Loosen the check nut.
Adjust the silencer to desired "clock" position.
Tighten the lock nut.
Dismantling for cleaning
Unscrew the two screws on the front end of the A12 silencer with a 3 mm hex key.
Use your hand or a rubber/plastic mallet (gently) to push the inner tube until the back comes away from the sleeve.
Pull out the contents from the back.
This requires a firearms licence to purchase; this must be presented on pick up, or for the item to be couriered to you a firearms mail order form is required.
We will contact you after purchase with the appropriate form and what is required.