Where to buy in store: Stockists
Choke attachment system for A-TEC A12 shotgun suppressor
This unit is inserted into the shotgun choke receptacle and allows attachment of the A12 suppressor.
Comes with lock ring to correctly clock the A12 Suppressor.
These chokes are available separately so that you can have chokes for multiple shotguns and swap the A12 between them.
Choke systems available
Gun Type |
Choke System |
| Baikal | Baikal |
| Benelli: Super Black Eagle 2 & 3, M2, Vinci, Super Vinci, Ultra Light, Legacy Sport (made after 2007), current Sport II, Super Sport, Cordoba, Ethos, Montefeltro, Montefeltro Silver, 828 | Crioplus Benelli |
| EGE | EGE |
| Fabarm | Fabarm |
| Fair | Fair |
| Mossberg: 500, 510 Bantam/Super Bantam, 535, 930, 9200, Maverick 88 Shotguns | Invector Mossberg |
|
Winchester: SX2, SX3, SX4 & SXP, New Supreme, 101 models Browning: Maxus, Citori 12, Gold Hunter, Silver, White Lightning |
Invector Plus Browning |
|
Benelli: M1, M3, M4, Nova, Super Nova, SBE I, World Class, Legacy (after 2011), Legacy Sport, Montefeltro made prior to 2007 Sulun: TAC12 Franchi: Affinity, Affinity 3 Dickinson: 212 |
Mobilchoke Franchi |
| Beretta: SV10 Perennia, SV10 Prevail, A400 Xplor etcetera, Mod. 1301, UGB25, 471 Silver Hawk 12ga | Optima HP Beretta |
| Remington: 870, 887, 11-87, 1100, V3 | Remington 870 |
| Remington: 1100 G3 12 gauge, 1100 Competition, 105 CTI, Premier Over and Under 12 gauge, Versa Max | Remington Pro Bore |
| Yildiz | Yildiz |
Warning
A-TEC A12 is approved for wadded 12/70 ga. ammunition, max 42g. US #2 or smaller shot size. Do not use slugs, reloaded or high speed ammunition.
ATTACHMENT INSTRUCTIONS
- Check your gun is unloaded and totally safe.
- It is easiest if the gun is mounted in a cradle while you fit the suppressor and a friend to lend a hand is helpful.
- Clean your barrel choke threads. Apply a little grease or oil to the choke threads to keep the choke lubricated.
- Check you have the correct A-Tec A12 Choke by inserting and threading into your barrel lightly by hand.
- Screw in until it stops. The choke thread should be totally inside the barrel, leaving the separate thread for the Suppressor on the outside.
- Use the supplied A-Tec Choke Key to torque the choke tightly into the barrel.
- Screw on the lock nut (contra-nut) onto the A12 choke. Orientate with the cutouts for the wrench to the rear. Screw down until lightly contacting the barrel.
- Now screw on the A12 Suppressor. It can be a little tricky to find where the threads engage so take your time. Place the suppressor thread onto the choke thread, use a finger in the end of the suppressor to provide a rotation axis and use the other hand to rotate the suppressor to find the start of the thread.
- Screw the Suppressor down lightly until it stops, and check orientation (clock position). Now unscrew the suppressor only just enough to orientate it correctly.
- Screw the lock nut out to meet the suppressor.
- Use the supplied wrench to apply torque to the lock nut against the Suppressor to lock it in position. A hand holding the Suppressor to keep it clocked while applying torque to the locknut is required.
- Visually check that the Suppressor appears straight and true on the barrel.
This requires a firearms licence to purchase; this must be presented on pick up, or for the item to be couriered to you a firearms mail order form is required.
We will contact you after purchase with the appropriate form and what is required.
