THE SECOND HIGHEST PERFORMANCE SUPPRESSOR ON THE MARKET
Where to buy in store: Stockists
The H2 is now superseded by the H3.
The A-TEC H2 high performance suppressor was engineered to have the highest possible noise reductive effect in it's given volume. A combination of stainless steel in the boss and super lightweight alloy body provide an extremely strong noise reducing suppressor. Modular design makes it possible to add on or subtract modules to choose your desired length to noise reduction ratio.
When you hear this on your rifle you just won't believe how quiet a suppressor can be.
This unit is designed for large magnum calibres as such has a large size and capacity.
CLICK HERE TO ADD YOUR A-LOCK ADAPTOR
Design
- H2 is an upgraded modular Hertz with improved technology, stronger design and and it is very effective on the first round pop/cold barrel shot.
- It comes 80mm back over the barrel.
- The middle modules can be removed to shorten the suppressor. This reduces it's effect by about 5DB(C) per module.
- The H2 has a high noise suppressive rating greater than 30 dB
- Built in muzzle brake to capture exit gas energy to reduce recoil.
- Steel boss and muzzle brake make the critical high pressure components very strong and resistant to gas erosion. The outer tube is constructed of ultra light alloy to shed weight.
- The H2 uses the unique A-LOCK muzzle adaptor to attach to your rifle.
- The H2 is magnum rated and fully suitable for 338 Lapua Magnum and equivalent calibres. Send it.
A-LOCK Adaptor
IT'S A REVOLUTION IN HOW YOU THINK ABOUT ATTACHING YOUR SUPPRESSOR.
This unit can be used in two ways:
- Adaptor locked on to the muzzle thread
- This allows the Optima and H2 suppressor to be quick attached and detached in a second with a forceful 1/4 turn.
- This allows a single suppressor to be shared amongst multiple rifles all with different threads. In this case the calibre of the suppressor must be equal or greater than the largest calibre rifle.
- This means the adaptor is on the end of the muzzle, maybe affecting it's aesthetic if it is a thin barrel
- Adaptor locked inside the suppressor
- This allows the suppressor to be attached using muzzle threads like any conventional suppressor.
- When the suppressor is removed, nothing is left on the barrel.
Specifications
| OVERALL PERFORMANCE | 30 DB(C) |
| FIRST ROUND POP | 30 DB(C) |
| BEST PERFORMANCE | 35 B(C) |
| SILENCER WEIGHT | Up to 410gm |
| DIAMETER | 49.4mm |
| OVER BARREL LENGTH | 80mm |
| ADDED LENGTH | Up to 150mm |
| TOTAL LENGTH | Up to 230mm |
| MATERIAL | ALUMINIUM, STEEL |
| TREATMENT | BLACK ANODISED |
| AVAILABLE CALIBRES | 6.5mm, .308, .338(spec-order, see the MH2) |
| MAX BARREL DIAMETER AT SUPPRESSOR | 23.7mm |
How does this compare to the rest of our range?
Check out our Giant Suppressor Comparison Document
Warning
Tighten the silencer firmly by hand onto the A-LOCK Mini Adapter prior to shooting and check regularly and between shots. This is good practice for any suppressor on threads, not just A-Lock.
This requires a firearms licence to purchase; this must be presented on pick up, or for the item to be couriered to you a firearms mail order form is required.
We will contact you after purchase with the appropriate form and what is required.
