Where to buy in store: Stockists
SUPERB COMBINATION OF RECOIL REDUCTION, MUZZLE CONTROL AND SOUND REDUCTION
The A-TEC PRS variants of suppressors are specifically built for precision match shooting. When round counts are high you want noise suppression to aid in maintaining focus and reducing fatigue. Conversely, when calling your own shots whilst shooting off improvised positions you want to see your own trace and impact; so you can correct fast and beat the clock. In the past, with legacy muzzle brakes, these have been two mutually exclusive outcomes. Why not have both? The A-Tec PRS suppressors combine a suppressor and muzzle brake into a single durable, precise and effective package.
Intended Use
High round count, high heat shooting that is usually conducted in serious competitive matches and also pest destruction. These units use durable materials to priortise longevity and precision over lightweight. Suitable for any match calibre up to and including 338LM. Select your desired balance of suppression vs recoil reduction by choosing between the PRS 1 Mod, 2 Mod or 3 Mod.
Design Features
- Stainless steel throughout the suppressor and thread adaptor to provide durability and longevity.
- Tough Cerakote surface finish to handle high temperature shooting and wear & tear.
- These units perform remarkably well with modern PRS and Long Range calibres such as 6Dasher, 6.5PRC, 300PRC and even 338LM.
- Hybrid design combing the benefits of both a suppressor and a legacy muzzle brake:
- Vastly dampened shock wave compared to legacy muzzle brakes due to its first and second stage suppression.
- Recoil and muzzle flip controlled with the brake stage which captures the escaping gas to brake the rifles recoil. It makes the recoil pulse vastly reduced compared to a conventional suppressor and keeps the recoil extremely straight. This keeps your cross hairs on target during the bullet flight so you can see your own impact and adjust.
- Facts coming soon on exactly what recoil reduction to expect from each variant (1 Mod, 2 Mod or 3 Mod).
- Conventional screw-on interface with the included thread adaptor:
- Many threads are supported and in stock.
- Wide thread shoulder suitable for snugging securely against heavy weight match barrels for high precision and repeatability.
- Not modular, it is fixed length. Select your desired balance of suppression vs recoil reduction by choosing between the PRS 1 Mod, 2 Mod or 3 Mod.
- We seal the thread adaptor into position before dispatch and it is very difficult to ever remove again without damage to the product. It is not intended that the user would swap the thread adaptor to another thread.
- Important note on reduction performance: Unique to A-Tec, our suppressors are tested to the latest MIL-STD-1474D military standard which is the most stringent and difficult standard to test to. Research shows our competitors do not test to this standard. For comparing to competitors products we prefer to let our reputation do the talking but you will observe our suppressors performing 5-10% better for a stated dB and significantly better for dB reduction vs. weight & length.
- A-Tec have only one grade of precision: Match Grade. A-Tec suppressors are second to none for concentricity, straightness and fine dimensional tolerances. This is especially evident in our bore apertures which are tight to the projectile to maximise sound reductive effect. To get peak performance from an A-Tec suppressor, one's rifle muzzle must be correctly crowned, threaded and shouldered.
Specifications (PRS 2 Mod)
| OVERALL PERFORMANCE | 24 DB(C) |
| SILENCER WEIGHT | 465gm |
| DIAMETER | 44.4mm |
| OVER BARREL LENGTH | 15mm |
| ADDED LENGTH | 157mm |
| TOTAL LENGTH | 172mm |
| MATERIAL | STAINLESS STEEL |
| SURFACE TREATMENT | CERAKOTE |
| AVAILABLE CALIBRES | < 6.5mm, .30, .338 |
| THREADS AVAILABLE AT LINK BELOW | 5/8-24, 3/4-24, 14x1, 15x1, 16x1, 17x1, 18x1, 18x1.5 |
| MAX BARREL DIAMETER AT SUPPRESSOR | n/a. Shoulder face of thread nut diameter: 26mm |
What comes in the box?
- Suppressor with thread adaptor installed
- Instruction manual
- Currently shipped in a nice tough storage case
Add your Thread Adaptor for your muzzle thread
Click here to add your Thread Adaptor
A-Tec Rifle Suppressor Quick Reference
In selecting your new suppressor for your purpose; consider your desired balance of effect vs. weight, size and heat resistance. Click image for a close-up:
How does this compare to the rest of our range?
Check out our Giant Suppressor Comparison Document
This requires a firearms licence to purchase; this must be presented on pick up, or for the item to be couriered to you a firearms mail order form is required.
We will contact you after purchase with the appropriate form and what is required.
