Where to buy in store: Stockists
SUPPRESSOR FOR ANY PUMP ACTION OR SEMIAUTO SHOTGUN
The A-TEC A12 can be fitted to any shotgun with pump action or semiauto with choke system. Highly effective and light weight, the suppressor reduces the noise signature of typical loads in a typical semi-auto gun by 19dB.
Features
- Easy installation using the correct choke and included tools. It should be ordered with a choke that fits the gun of your choice.
- Easy to clock / time / align vertically with the gun axis so it presents as unobtrusive profile as possible.
- Lightweight (for its size) to minimise effect on gun balance.
- Sits low under the top rib so it doesn't interfere with instinctive sighting.
- Ideal setup on a short barrelled semi gun.
What comes in the box?
- Suppressor
- Choke Adaptor tool
- Timing nut tool
- Instruction manual
- Shipped in a padded box
Be sure to add a Choke Adaptor:
CLICK HERE TO ADD YOUR CHOKE ADAPTOR
Choke systems available
Gun Type |
Choke System |
| Baikal | Baikal |
| Benelli: Super Black Eagle 2 & 3, M2, Vinci, Super Vinci, Ultra Light, Legacy Sport (made after 2007), current Sport II, Super Sport, Cordoba, Ethos, Montefeltro, Montefeltro Silver, 828 | Crioplus Benelli |
| EGE | EGE |
| Fabarm | Fabarm |
| Fair | Fair |
| Mossberg: 500, 510 Bantam/Super Bantam, 535, 930, 9200, Maverick 88 Shotguns | Invector Mossberg |
|
Winchester: SX2, SX3, SX4 & SXP, New Supreme, 101 models Browning: Maxus, Citori 12, Gold Hunter, Silver, White Lightning |
Invector Plus Browning |
|
Benelli: M1, M3, M4, Nova, Super Nova, SBE I, World Class, Legacy (after 2011), Legacy Sport, Montefeltro made prior to 2007 Sulun: TAC12 Franchi: Affinity, Affinity 3 Dickinson: 212 |
Mobilchoke Franchi |
| Beretta: SV10 Perennia, SV10 Prevail, A400 Xplor etcetera, Mod. 1301, UGB25, 471 Silver Hawk 12ga | Optima HP Beretta |
| Remington: 870, 887, 11-87, 1100, V3 | Remington 870 |
| Remington: 1100 G3 12 gauge, 1100 Competition, 105 CTI, Premier Over and Under 12 gauge, Versa Max | Remington Pro Bore |
| Yildiz | Yildiz |
How does this compare to the rest of our range?
Check out our Giant Suppressor Comparison Document
Warning
A-TEC A12 is ONLY approved for wadded 12/70 ga. ammunition, max 42g. US #2 or smaller shot size. Do not use slugs, reloaded or high speed ammunition.
ATTACHMENT INSTRUCTIONS
Prior to use of the A12, the choke must be mounted correctly in the silencer.
- Check that the two front screws and two backend screws are tight and that there are no foreign objects inside the silencer.
- Check that you have the correct choke by trying it gently by hand in your barrel.
- Screw the A12 choke all the way to the bottom of the threads in the A12 silencer.
- Firmly tighten the lock nut with the supplied tools.
- Screw the A12 silencer with choke attached on to your barrel.
- Loosen the check nut.
- Adjust the silencer to desired "clock" position.
- Tighten the lock nut.
Dismantling for cleaning
- Unscrew the two screws on the front end of the A12 silencer with a 3 mm hex key.
- Use your hand or a rubber/plastic mallet (gently) to push the inner tube until the back comes away from the sleeve.
- Pull out the contents from the back.
This requires a firearms licence to purchase; this must be presented on pick up, or for the item to be couriered to you a firearms mail order form is required.
We will contact you after purchase with the appropriate form and what is required.
